High quality efficient pulse bag dust collector for cement plant

Features:

1. The dust removal efficiency is high, and a variety of dust removal methods are above 99.9%;

2. It is equipped with a variety of normal temperature, medium temperature and high temperature cloth bags to deal with various dusts of different properties and environments;

3. A variety of products with different specifications and models, with a wide range of options, which can meet the needs of various working conditions;

The cloth bag is the "heart" accessory of the bag filter. The correct selection of the bag filter material is very important. Dust removal provides users with a variety of normal temperature, medium temperature and high temperature filter bags to meet different working conditions. In addition to the bag, the dust removal system plays a decisive role in the dust removal efficiency of the bag filter. The dust removal method is one of the characteristics of the bag filter and one of its classification standards. According to the cleaning method, the bag filter is divided into three types: mechanical vibration cleaning bag filter, pulse jet bag filter, and reverse blowing type bag filter.

Techinal parameters

The long-bag pulse dust collector can choose pressure difference control and timing control to clean dust according to different treatment processes. The pressure difference control mechanism is to open and close the back-blowing process according to the resistance value of the dust collector. When the resistance of the dust collector reaches the preset value for dust removal, generally 1200-1500Pa, a control signal to start the back-blowing cycle is issued, and the dust collector repeats the cycle of "dust removal-sedimentation-filtration" unit by unit until The resistance of the dust collector is reduced to the lower limit of the set resistance, which is generally 1000Pa. The pressure difference control mechanism can always control the resistance of the dust collector within the specified range, so that the dust collector maintains good dust removal efficiency and low operating energy consumption.

The long bag pulse dust collector is mainly composed of the upper box body, the middle box body, the ash hopper, the air inlet equalizing pipe, the bracket, the filter bag and the blowing device, the ash unloading device, etc., and the dust-containing air flows from the air inlet of the dust collector. Pipe into the ash hopper of each compartment, and under the diversion of the ash hopper diversion device, the large particles of dust are separated and fall directly into the dust, while the finer dust evenly enters the middle box and is adsorbed on the outer surface of the filter bag. The clean air enters the upper box and is discharged into the atmosphere through off-line valves and exhaust pipes. As the filtering conditions progress, the dust on the filter bag accumulates more and more. When the equipment resistance reaches the limit resistance value (generally set When it is 1500Pa), after the ash cleaning device automatically closes the off-line valve of one room according to the set value of differential pressure, the electromagnetic pulse valve is opened according to the set procedure to stop the air blowing, and the compressed air is used to instantly increase the pressure in the filter bag. , Shake off the dust on the filter bag (even if the fine dust is sticky, it can be called a thorough dust removal) into the ash hopper and discharged by the ash discharge mechanism.
Xinchen FMQD/PPC series air box pulse bag filter can provide users with different room numbers and different bag numbers PPC32, PPC64, PPC96, PPC128 and other specifications according to the user's different cleaning field conditions. You can choose according to the following parameter table. If you need technical support, you can call Xinchen service hotline: 0317-8046444. After explaining your cleaning site conditions and needs to our professional and technical personnel, we will provide free Provide you with a safer and reasonable dust removal solution

Equipment advantages

▲Clean the dust more thoroughly
The off-line three (filtering, cleaning, static) cleaning method is adopted to avoid the "re-adsorption" of cleaning.
▲More flexible design
According to the requirements of the working conditions, the settling chamber can be designed to increase the life of the filter bag, and the dust concentration can be as high as 1000g/Nm3.
▲Control is more convenient
Adopt PLC program or special pulse controller to control the dust removal, and it can be timed and manually, which ensures the dust removal effect of the air compressor.
Timing description: set the time program to automatically clean the dust from room to room
Manual instructions: Automatic control is adopted during normal work. When a single machine fails, the manual control can be switched randomly to avoid changing the program and causing too much ash accumulation in the ash hopper, causing the auger to jam or causing the dust to accumulate in the pipeline, reducing the suction effect and causing the pipeline to block.
▲Lower cost
Separate chamber spraying and cleaning: One pulse valve can spray one chamber at the same time (the number of filter bags has 32, 64, 96 specifications series). Compared with ordinary dust collectors, one valve blows six bags, and the number of pulse valves is reduced by 6-20 times.

        Botou Xinchen Environmental Protection Equipment Co., Ltd. is a professional company integrating environmental engineering and environmental protection equipment research, design, production, installation and service. The company is located in the West Development Zone, Botou City, Hebei Province, in the center of Beijing, Tianjin, Jinan and Shijiazhuang. In addition, the Beijing-Shanghai Expressway, Beijing-Shanghai Railway, National Highway 106 and National Highway 104 run through the city, and the transportation is very convenient.

        Our company takes science and technology investment as the forerunner, guarantees excellent quality, and takes sophisticated equipment and advanced technology as the core. It is an environmentally friendly product development and production base integrating design, manufacturing, installation, commissioning and after-sales service. The company has a strong economy A strong, high-quality management team, with CAD work design and sales, financial computer management network, and electronic control automation equipment system. We always adhere to the tenet of survival by quality, development by quality, and benefit from quality. We are now in the domestic technological development and production base of high-end, high-quality, high-performance environmental protection equipment, and our production and sales are in the same industry across the country. Ranked among the best. The main technical products include: desulfurization, exhaust gas dust removal, garbage incineration and other environmental pollution treatment technologies and equipment. The products are widely used in metallurgy, electric power, building materials, chemical industries and other industries.

　　 Our company mainly produces: baghouse dust collector, boiler dust collector, cyclone dust collector, Cartridge Filter Dust Collector, Dust Collector Filter Bags, and can also be designed and modified according to user needs. The company has an installation and commissioning team of more than 100 people, which can undertake the installation and commissioning of equipment for large-scale environmental protection systems.

        With the development of society and the improvement of human awareness of the environment, our company has continuously introduced new technologies and developed dozens of new products on the basis of the original products, which meets the needs of the market. The company takes the investment in science and technology as the forerunner. With advanced equipment, excellent quality as the guarantee, high-quality and fast after-sales service has won the trust of our customers.

　　The development of an enterprise is inseparable from technology, talents, and users. We are willing to establish a stable, equal and mutually beneficial business relationship with customers all over the country, so that we can develop and prosper together and make greater contributions to the cause of environmental protection. The company regards quality as its life, and regards the actual interests of customers and its long-term development as one. Over the years, our company has done everything in a down-to-earth manner, and has won the trust of users step by step. We wholeheartedly serve the new and old users, and work with you to create brilliant! We strive for survival by quality and development by quality.

　　Our company has always established long-term friendly trade relations with customers at home and abroad on the basis of equality and mutual benefit. Warmly welcome Chinese and foreign customers to negotiate business with us!